Evaluation of the component composition and thickness of the modified layer of tungsten and tantalum carbides during stationary sputtering by helium ions bombardment
- Autores: Manukhin V.V.1
- 
							Afiliações: 
							- National Research University “MPEI”
 
- Edição: Nº 9 (2024)
- Páginas: 101-105
- Seção: Articles
- URL: https://rjpbr.com/1028-0960/article/view/664754
- DOI: https://doi.org/10.31857/S1028096024090133
- EDN: https://elibrary.ru/EHOQAG
- ID: 664754
Citar
Texto integral
 Acesso aberto
		                                Acesso aberto Acesso está concedido
						Acesso está concedido Acesso é pago ou somente para assinantes
		                                							Acesso é pago ou somente para assinantes
		                                					Resumo
A method is proposed for calculating the component composition and thickness of a layer of two-component targets changed as a result of prolonged (stoichiometric) sputtering when irradiated with light ions. The method is based on a previously tested model of sputtering inhomogeneous two-component materials with light ions. In the case of stationary sputtering of tungsten and tantalum carbides with helium ions, the results of calculations of the component composition and thickness of the modified layer are presented in comparison with experimental data.
Texto integral
 
												
	                        Sobre autores
V. Manukhin
National Research University “MPEI”
							Autor responsável pela correspondência
							Email: manukhinvv@mpei.ru
				                					                																			                												                	Rússia, 							Moscow, 111250						
Bibliografia
- Wiederish H. // Surface Modification and Alloying. N.Y: Springer, 1983. P. 261.
- Betz G., Wehner G.K. // Sputtering by Particle Bombardment II. / Ed. Behrisch R. Berlin–Heidelberg: Springer–Verlag, 1983. P. 11.
- Andersen H.H. // Ion Implantation and Beam Processing / Ed. Williams J.S., Poate J.M. Sydney: Academic, 1984. P. 128.
- Sigmund P., Oliva A. // Nucl. Instrum. Methods Phys. Res. B. 1993. V. 82. P. 242.
- Seah M.P., Nunney T.S. // J. Phys. D. 2010. V. 43. № 25. P. 253001. https://doi.org/10.1088/0022-3727/43/25/253001
- Lian S., Yang H., Terblans J.J., Swart H.C., Wang J., Xu C. // Thin Solid Films. 2021. V. 721. P. 138545. https://doi.org/10.1016/j.tsf.2021.138545
- Sukenobu S., Gomay Y. // J. Nucl. Sci. Technol. 1984. V. 21. № 5. P. 366. https://doi.org/10.1080/18811248.1984.9731057
- Kelly R., Oliva A. // Nucl. Instrum. Methods Phys. Res. B. 1986. V. 13. P. 283.
- Manukhin V.V. // J. Phys.: Conf. Ser. 2020. V. 1683. P. 032002. https://doi.org/10.1088/1742-6596/1683/3/032002
- Manukhin V.V. // J. Phys.: Conf. Ser. 2022. V. 2388. P. 012009. https://doi.org/10.1088/1742-6596/2388/1/012009
- Sigmund P., Oliva A., Falcone G. // Nucl. Instrum. Methods. 1982. V. 194. P. 541.
- Sigmund P., Oliva A. // Nucl. Instrum. Methods Phys. Res. B. 1993. V. 82. P. 242.
- Galkute L., Pranevičius L., Zubauskas G. // Nucl. Instrum. Methods Phys. Res. B. 1987. V. 21. P. 46.
- Манухин В.В. // Журнал технической физики. 2023. Т. 93. Вып. 6. С. 13. https://dio.org./10.21883/JTF.2023.06.55610.52-23
- Patterson W.L., Shirn G.A. // J. Vacuum Sci. Technol. 1967. V. 4. P. 343.
- Falcone G., Sigmund P. // Appl. Phys. 1981. V. 25. P. 307.
- Vicanek M., Jimenez-Rodriguez J.J., Sigmund P. // Nucl. Instrum. Methods Phys. Res. B. 1989. V. 36. P. 124.
- Eckstein W. Computer Simulation of Ion–Solid Interaction. Berlin–Heidelberg: Springer–Verlag, 1991. 296 p.
- Biersack J.P. // Fusion Technol. 1984. V. 6. P. 475.
- Chou P.S., Ghoniem N.M. // J. Nucl. Mater. 1986. V. 141–143. P. 216.
- Roth J., Bohdansky J., Martinelli A.P. // Radiat. Effects. 1980. V. 48. P. 213.
- Varga P., Taglauer E. // J. Nucl. Mater. 1982. V. 111–112. P. 726.
- Taglauer E., Heiland W. // Proc. Symp. on Sputtering. Wien, 1980. P. 423.
- Eckstein W., Biersack J.P. // Appl. Phys. A. 1985. V. 37. P. 95.
Arquivos suplementares
 
				
			 
						 
						 
					 
						 
						 
									

 
  
  
  Enviar artigo por via de e-mail
			Enviar artigo por via de e-mail 






